Icon 2007-2016 Gm 1500, 1-3" Lift, Stage 3 Suspension System, Small Taper

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

Additional Information

• OEM Wheels & Tires Fitment: Yes
• TECH NOTE: Not compatible with models equipped Magnetic Ride Control
• TECH NOTE: Not compatible with Hybrid models
• TECH NOTE: Included rear shocks are compatible with 0-1.5" of rear lift on most models
• TECH NOTE: Small taper applications can be identified by their forged steel OE front lower control arms
• Ships in multiple boxes
• Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5” Backspace / 0mm Offset
• Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
• APPLICATION NOTE #48: SLIGHT MODIFICATIONS TO FACTORY SHOCK MOUNTS MAY BE REQUIRED
• APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
• APPLICATION NOTE #89: DOES NOT WORK ON SUV MODELS
• TECH NOTE: Only compatible with OE spindles. DO NOT install in combination with ANY aftermarket spindles.

Recommended Aftermarket Wheels

• ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
• ICON Alloys - 18x9" w/ 5” Backspace / 0mm Offset
• ICON Alloys - 20x9" w/ 5” Backspace / 0mm Offset

Recommended Aftermarket Tires

• 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)